Y SERIES - REAR OF PANEL MOUNT RECTANGULAR METAL
RECEPTACLE
1. Y3MPC
2. Y3FPC
3. YEF02 ESCUTCHEONS
Series Y(*)MPC. Male receptacle for panel or chassis mounting escutcheon. PC terminals and standoffs. Rear of panel mount in .750 inch diameter hole. Maximum panel thickness: 25 inches (6.35 mm); .156 inches (3.96 mm) if YEM escutcheon is used.
Series Y(*)FPC. Female receptacle for panel or chassis mounting. PC Terminal and standoffs. Rear of panel mount in .875 inch (22.22 mm) diameter hole.
Series Y(*)F. Female receptacle for panel or chassis mounting. Rear of panel mount in .875 inch (22.22 mm) diameter hole.
Series Y(*)FD, Y(*)FDPC. Female receptacles. Same as Y(*)F and Y(*)FPC, respectively, except with FAS-DISCONNECT detent.
Series YEF Escutcheons. Trim escutcheons provide distinctive panel appearance and can also color code connections. Available in black (standard), red, green, white, and yellow. Other colors possible on special order where production quantities warrant.
ASSEMBLY/MOUNTING
AII receptacles are rear-of-panel mount (units with PC terminals also mount/terminate to PC board). Flange fastens to chassis/panel with two #4-40 machine screws (not supplied). Use of escutcheons is optional.
Install latch release lever (Series Y(*)F and Y(*)FPC) after receptacle is fastened to chassis/panel. Insert lever in slot from front and press inward until it locks (snaps) into place. To remove lever, depress rear of lever (with screwdriver) through opening at top rear of housing and pull lever straight out.
RECEPTACLES
| Part Numbers |
Insert
Contacts |
Part Number
Male¤ |
Insert Pins
|
Female
Latchlock¤ |
Female
Detent¤ |
| Y3F |
Y3FD |
3 |
Y3MPC |
3 |
¤ Suffix letters "PC" indicate PC terminals; all others have solder lugs.
ESCUTCHEONS
| Part Number |
Color |
Part Number |
Color |
| ¤YEF01 |
Red |
YEF04 |
Blue |
| YEF02 |
Black |
¤YEF05 |
White |
| ¤YEF03 |
Green |
¤YEF08 |
Yellow |
SPECIFYING NOTE: YEM02 escutcheon can be ordered on special order; contact Switchcraft.
click here to download a schematic
drawing
(you will need to have Adobe Acrobat installed on your system to do this)
