BNC RECEPTACLES
PC MOUNT BNC COMMERCIAL RECEPTACLES

1. Part Number BNCRAPC2000
2. Part Number BNCSTPC2000

click here to download a schematic drawing
(you will need to have Adobe Acrobat installed on your system to do this)

Designed for commercial RF applications, PC mount high frequency coaxial connectors are low-cost/high-performance from 10 kHz to 1 GHz. Available with right-angle or straight PC terminals; gold-, silver- or tin-plated contacts; molded-on standoff shoulders for stable spacing from PC board surface; mounting hardware (where applicable) for bushing mount to panel-chassis; and solder posts for a more stable mount. Accommodates up to .25 inch (6.4 mm) panel thickness and .125 inch (3.2 mm) PC board thickness.

STRAIGHT RECEPTACLES (Vertical Mount)

Part Numbers			Features
Gold-plated	Silver-plated Contacts	Tin-plated Contacts	Insulator Color	Mounting	Hardware
¤BNCSTPC1000	¤BNCSTPC2000	¤BNCSTPC3000	Black	Solder Post	No
	BNCSTPC2001	¤BNCSTPC3001			Yes
	¤BNCSTPC2010	¤BNCSTPC3010		Holes	No
	¤BNCSTPC2011				Yes
	¤BNCSTPC2900	¤BNCSTPC3900	White	Solder Post	No
	¤BNCSTPC2901	¤BNCSTPC3901			Yes
	¤BNCSTPC2910			Holes	No
	¤BNCSTPC2911				Yes

¤ Available on special order only; contact Switchcraft for price and delivery.

RIGHT-ANGLE RECEPTACLES

Part Numbers			Features
Gold-plated	Silver-plated Contacts	Tin-plated Contacts	Insulator Color	Mounting	Hardware
¤BNCRAPC1000	¤BNCRAPC2000	¤BNCRAPC3000	Black	Solder Post	No
¤BNCRAPC1001	BNCRAPC2001	¤BNCRAPC3001			Yes
	¤BNCRAPC2010	¤BNCRAPC3010		Holes	No
	¤BNCRAPC2011				Yes
	¤BNCRAPC2900	¤BNCRAPC3900	White	Solder Post	No
	¤BNCRAPC2901	¤BNCRAPC3901			Yes
	¤BNCRAPC2910	¤BNCRAPC3910		Holes	No
	¤BNCRAPC2911				Yes

¤ Available on special order only; contact Switchcraft for price and delivery.

SPECIFICATIONS

ELECTRICAL

Impedance: 50 ohms.

Working Voltage: 500 V rms.

Contact Resistance: 10 milliohms maximum.

Insulation Resistance: 10,000 Megaohms, minimum.

Dielectric Withstanding Voltage: 1,500 V rms.

MECHANICAL

Mating Cycles: 1,000 minimum.

MATERIAL

Body: Plating over zinc die-cast.

Sleeve: Thermoplastic.

Insulation: Thermoplastic.

Center Contact and Terminal: Gold, silver or tin-plating
over copper alloy.

Ground Terminals: Tin-plated.

Mounting Posts: Tin-plated copper alloy.

Mounting Hardware: Internal tooth lock washer and
hex nut.

To search a category please click on the corresponding icon:



| Connectors | Jacks and Plugs |
| Patch Panels, Patch Kits & Jackfields | Cable Assemblies and Patch Cords | Switches |

All products shown are covered by Switchcraft's limited lifetime warranty.

| Switchcraft home |
About Us | Products | What's New | Search | Contact Us