1. EAC227
2. EAC311
3. EAC305
4. EAC323
5. EAC309
6. EAC325
7. EAC333
8. EAC333S
click here to download a schematic
drawing
(you will need to have Adobe Acrobat installed on your system to do this)
click here to download a schematic
drawing
(you will need to have Adobe Acrobat installed on your system to do this)
click here to download a schematic
drawing
(you will need to have Adobe Acrobat installed on your system to do this)
click here to download a schematic
drawing
(you will need to have Adobe Acrobat installed on your system to do this)
click here to download a schematic
drawing
(you will need to have Adobe Acrobat installed on your system to do this)
click here to download a schematic
drawing
(you will need to have Adobe Acrobat installed on your system to do this)
click here to download a schematic
drawing
(you will need to have Adobe Acrobat installed on your system to do this)
Two and three-pin/contact grounding primary power receptacles are designed to meet EN 60 320, as well as applicable UL, CSA, VDE and other specifications. Receptacles feature choice of short, standard or long solder lugs or FASTON ® terminals. Receptacles snap-in or screw mount from the front or rear of panel. Receptacles have orbitally riveted lugs (except EAC233, EAC305, EAC323 EAC325, EAC333, EAC405) for superior mechanical/electrical connections. Extended socket versions permit minimum behind-panel depth.
Receptacles are designed for use in European and domestic instrumentation, power rack mounted devices, test equipment and appliances. Three-pin male receptacles have .125 inch (3.18 mm) longer center (ground) pin. Ground circuit is established before power circuits "make", and is maintained until after power circuits "break".
EAC405
SPECIFICATIONS
ELECTRICAL
Insulation Resistance: 2 million megohms @ 500 V DC.
Dielectric Strength: 1500 V (rms).
Arcing Test: Meets UL 498 Standard.
MECHANICAL
Solderability Standard: Meets MIL-STD-202, method 208, EIA RS-186-9E.
ENVIRONMENTAL
Thermal Range: -55° C to +65° C (except EAC45x series).
Salt Spray: Meets MIL-STD-202, method 101; EIA-RS-186-5E, method 5.
MATERIAL
Shell: EAC307 through EAC327. Black polyester. EAC303,
EAC307 through EAC315. UL flammability rating of UL94 V-0, yellow card #E45575.
EAC309 through EAC327, EAC333. Black polyester, UL flammability rating of UL94 V-0, yellow card #E45575.
EAC233, EAC233S, EAC305, EAC325, and EAC333S. Black polycarbonate, UL flammability rating of UL94 V-0, yellow card #E45329.
EAC323, EAC409 through EAC411 Black polycarbonate, UL flammability rating, or equivalent UL94 V-0, yellow card #E33640, or equivalent.
Pins, Contacts and Terminals: Plated copper alloy.
¤EAC227--2-pin male receptacle with standard solder lug terminals, similar to EAC327.
¤EAC233--2-pin, male receptacle with right-angle housing for PC mount. PC terminals project .130 inch (3.3 mm) to extend through PC board. Rear of panel mount. Two, .136 inch (3.45 mm) diameter holes permit fastening to PC board; two additional .136 inch (3.45 mm) holes are for fastening to panel or chassis, if required.
¤EAC233S--Similar to EAC233, but with two, snap-in retainers through mounting flanges for PC mount.
EAC305--3-contact female receptacle. Front mount with
two, #4 screws or .094 inch (2.38 mm) diameter rivets
(not supplied).
EAC309--3-pin male receptacle with standard lug terminals. Mounts from front or rear of panel with two, #5 screws or .125 inch (3.18 mm) diameter rivets (not supplied).
EAC311--3-pin male receptacle with FASTON® terminals. Mounts from front or rear of panel with two, #5 screws or .125 inch (3.18 mm) diameter rivets (not supplied).
¤EAC315--3-pin male receptacle with long solder lug terminals. Mounts from front or rear of panel with two, #5 screws or .125 inch (3.18 mm) diameter rivets (not supplied).
¤EAC319--3-pin male receptacle with short solder lug terminals. Mounts from front or rear of panel with two, #5 screws or .125 inch (3.18 mm) diameter rivets (not supplied).
¤EAC323--3-pin male receptacle with short solder lug terminals. Extended socket housing (mounting flange on rear of receptacle) provides more behind panel clearance. Mounts with two, #4 screws or .094 inch (2.38 mm) diameter rivets (not supplied).
EAC325--3-contact female receptacle with short solder lug terminals. Extended housing (mounting flange on rear of receptacle) provides more behind panel depth. Mounts with two, #4 screws or .094 inch (2.38 mm) diameter rivets (not supplied).
EAC327--3-pin male receptacle, similar to EAC319 except with standard solder lugs.
EAC333--3-pin, 10A, 250V male receptacle with right-angle housing for PC mount. PC terminal and hole mounting details are the same as for EAC233. Ground pin is integral with ground solder lug on rear of receptacle.
¤EAC333S--Similar to EAC333, but with two, snap-in retainers through mounting flanges for PC mount.
¤EAC405--3-contact female receptacle with standard solder lug terminals. Snap-in panel mounting.
EAC409--3-pin male receptacle with standard solder lug terminals. Snap-in panel mounting.
EAC411--3-pin male receptacle with FASTON terminals. Snap-in panel mounting.
EAC413--3-pin male receptacle with FASTON terminals on LINE and NEUTRAL and a solder lug on EARTH GROUND. Snap-in panel mounting.
EAC451--3-contact female receptacle with straight PC terminals for use in "HOT" applications. Snap-in panel mounting.
EAC453--Same as EAC451 except with solder lug
terminations.
EAC455--Same as EAC451 except with FASTON
terminations.
EAC457--Same as EAC451 except with FASTON power
terminations and solder lug ground termination.
¤ Available on special order only; contact Switchcraft for price and delivery.
SERIES EAC
| Part Number |
Pins/Contacts1 |
Mounting2 |
Terminals |
Listings |
Ratings |
Switchcraft
Mating Number3 |
Comments4 |
| ¤EAC227 |
M |
Front or Rear |
Solder Lug |
UL |
15 A, 250 V AC |
P2392 |
- |
| CSA |
| ¤EAC233 |
M |
Rear |
PC |
UL, CSA, |
15 A, 250V AC |
P2392 |
Semko, Demko, Nemko,
SETI, and SEV Approved |
| VDE |
10 A, 250 V AC |
| ¤EAC233S |
M |
Rear |
PC |
UL, CSA, |
15 A, 250 V AC |
P2392 |
Semko, Demko, Nemko,
SETI, and SEV Approved |
| VDE |
10 A 250 V AC |
| EAC305 |
F |
Front |
Solder Lug |
UL & VDE |
15 A, 250 V AC |
- |
Semko, and SEV Approved |
| VDE |
10 A, 250 V AC |
| EAC309 |
M |
Front or Rear |
Solder Lug |
UL & CSA |
15 A, 250 V AC |
P2392 |
Demko, Semko,Nemko,
SETI, and SEV Approved |
| VDE |
10 A, 250 V AC |
| EAC311 |
M |
Front or Rear |
FASTON |
UL & CSA |
15 A, 250 V AC |
P2392 |
Semko, Demko, Nemko,
SETI, and SEV Approved |
| VDE |
10 A, 250 V AC |
| ¤EAC315 |
M |
Front or Rear |
Solder Lug
(Long) |
UL & CSA |
15 A, 250 V AC |
P2392 |
| VDE |
10 A, 250 V AC |
| ¤EAC319 |
M |
Front or Rear |
Solder Lug
(Short) |
UL & CSA |
15 A, 250 V AC |
P2392 |
- |
| VDE |
| ¤EAC323 |
M |
Front or Rear |
Solder Lug
(Short) |
UL & CSA |
15 A, 250 V AC |
P2392 |
Mounting flange on rear Semko,
Nemko, SETI Approved |
| VDE |
10 A, 250 V AC |
| EAC325 |
F |
Rear |
Solder Lug
(Short) |
UL & CSA |
15 A, 250 V AC |
- |
Mounting flange on rear |
| VDE |
10 A, 250 V AC |
| EAC327 |
M |
Front or Rear |
Solder Lug |
UL & CSA |
15 A, 250 V AC |
P2392 |
Demko, Semko, Nemko
SETI and SEV Approved |
| VDE |
10 A, 250 V AC |
| EAC333 |
M |
Rear |
PC |
UL, & VDE |
15 A, 250 V AC |
P2392 |
Semko, Demko, Nemko,
SETI, and SEV Approved |
| CSA |
10 A, 250 V AC |
| ¤EAC333S |
M |
Rear |
PC |
UL & VDE |
10 A, 250 V |
P2392 |
| CSA |
| ¤EAC4055 |
F |
Snap-In |
Solder Lug |
UL & CSA |
15 A, 250 V AC |
- |
- |
| VDE |
10 A, 250 V AC |
| EAC4095 |
M |
Snap-In |
Solder Lug |
UL, & CSA |
15 A, 250 V AC |
P2392 |
Demko, Semko, Nemko,
SETI and SEV Approved |
| VDE |
10 A, 250 V AC |
| EAC4115 |
M |
Snap-In |
FASTON |
UL, CSA |
15 A, 250 V AC |
P2392 |
Semko, Demko, Nemko,
SETI and SEV Approved |
| VDE |
10 A, 250 V AC |
| EAC4135 |
M |
Snap-In |
Solder Lug/
FASTON |
UL, CSA |
15 A, 250 V AC |
P2392 |
Semko, Demko, Nemko,
SETI and SEV Approved |
| VDE |
10 A, 250 V AC |
| EAC4516 |
F |
Snap-In6 |
PC |
UL, & CSA |
15 A, 250 V AC |
- |
Rated for use up to 120°C |
| VDE |
10 A, 250 V AC |
| EAC4536 |
F |
Snap-In6 |
Solder Lug |
UL, & CSA |
15 A, 250 V AC |
- |
Rated for use up to 120°C |
| VDE |
10 A, 250 V AC |
| EAC4556 |
F |
Snap-In6 |
FASTON |
UL, & CSA |
15 A, 250 V AC |
- |
Rated for use up to 120°C |
| VDE |
10 A, 250 V AC |
| EAC4576 |
F |
Snap-In6 |
Solder Lug/
FASTON |
UL, & CSA |
15 A, 250 V AC |
- |
Rated for use up to 120°C |
| VDE |
10 A, 250 V AC |
1 M = Male; F = Female.
2 F = Front; R = Rear. See mounting drawings for mounting details.
3 Also mates with Belden and other standard cords.
4 Semko (Sweden), Demko (Denmark), Nemko (Norway), SETI (Finland), SEV (Switzerland).
5 Receptacles are snap-in mount, and can be ordered to accommodate .030, .040, .050 and .060
inch panel thickness. For snug fit in panel or for other specifying assistance, contact Switchcraft.
6 Available only for .050 inch and .060 inch panel thickness
¤ Available on special order only; contact Switchcraft for price and delivery.
UL No. E38829-EAC-309 thru -327 UL No. E65081-EAC-305
CSA Guide 365-E-1, Class 6233, File Card No. LR27474
VDE Certificate of Compliance No. 731 (EAC-305, -325, -405), all others VDE approval No. 3181.
If you have been using a 15 amp rated Switchcraft EAC connector ending in an even number, you can now buy an identical part number that has a 10 amp European rating in addition to the 15 amp UL and CSA approval. The part number for the new dual rated part is one less than the old part number (eg. EAC310 becomes EAC309, EAC412040 becomes EAC411040, EAC234 becomes EAC233, EAC458050 becomes EAC457050, etc.)
NOTE: Contact your Switchcraft Representative for price and delivery.
