Switchcraft

Previous Page | Return to Index | Next Page

3.5 mm DUAL STEREO JACK

1. UNSHIELDED - 35RAPC7J
2. UNSHIELDED - 35RAPC7J
3. SHIELDED - 35RAPC7JS

click here to download a schematic drawing
(you will need to have Adobe Acrobat installed on your system to do this)

FEATURES
* 3-conductor, miniature phone jack mates with 3.5 mm
finger plugs.
* Saves board space...two jacks in a single vertical
mount footprint.
* Ideally suited for infra-red and convection oven solder-
ing 235°C (455°F).
* Board retention pins accommodate PC board thickness
range of .050 inches to .080 inches.
* Single-screw panel mounting hole is standard.
* EMI-RFI shield, optional.
* Housing UL 94V-0 rated against flammability.
APPLICATIONS
* Multi-media workstations
* Headphones/microphone sets
* Interactive TV
* Audio
* Telecommunications
* Medical
* Computer
* Instrumentation
MATERIALS
Housing: Thermoplastic.
Tip and Ring Springs: Silver-plated copper alloy.
Shunt Terminals: Silver-plated copper alloy.
Sleeve Terminals: Silver-plated copper alloy.
Shield: Pre-tinned copper alloy.
PERFORMANCE SPECIFICATIONS
1. Insertion/Extraction Forces, initial: 0.8 to 6 pounds.
2. Dielectric Withstanding Voltage: 500 VAC.
3. Insulation Resistance, initial: 100 Megaohms, min.
4. Contact Resistance: Between plug and jack:
50 milliohms, maximum Between springs and shunts:
30 milliohms, maximum.
5. Life: 5000 cycles, minimum.
ORDERING INFORMATION
Part Number:
Shielded - 35RAPC7JS
Unshielded - 35RAPC7J
1. Order by part number.
2. Contact Switchcraft for special order information.

Previous Page | Return to Index | Next Page