
3.5 mm SINGLE MONO JACKS
1. 35PM1
2. 35PM2Aclick here to download a schematic drawing
(you will need to have Adobe Acrobat installed on your system to do this)
FEATURES
* 2-conductor phone jacks similar to Littel-Jax®
phone jacks, but smaller.* For connecting in limited space
* Mate with 3.5 mm phone plugs
* Notched insulators interlock internal parts
* Mounting hole: .250" diameter in panels up to .125" thick (mounting hardware supplied)
* For insulated mount, order two washers separately, Number S1564 (swedged fiber washer .312" diameter mounting hole) and number S2207 (flat phenolic washer)
SPECIFICATIONS
MECHANICAL
Life: 5,000 insertion/withdrawal cycles, minimum
ELECTRICAL
Contact Resistance: .075 ohms maximum
Insulation Resistance: 5,000 M(omega) minimum
Dielectric Withstanding Voltage: 250V AC maximum
Contact Rating: .25A, 48V DC
MATERIAL
Mounting Bushing: Nickel-plated copper alloy.
Insulating Spacers: Rigid plastic.
Springs: Copper alloy.
Sleeve Terminal: Tin-plated copper alloy.
Hardware: Supplied with one, Number P11501
nickel-plated brass locknut, and one, Number S17901
nickel-plated steel flat washer.
PART
NUMBERDESCRIPTION JACK SCHEMATIC1 TYPICAL MATING PLUG 35PM1 Open circuit I 750 35PM2A Shunted (closed circuit) III 750 1 See jack schematics on pages 65 and 66.
ORDERING INFORMATION
1. Order by part number.2. Contact Switchcraft for more information.
To search a category please click on the corresponding icon:
.gif)
| Connectors | Jacks and Plugs |
| Patch Panels, Patch Kits & Jackfields | Cable Assemblies and Patch Cords | Switches |
All products shown are covered by Switchcraft's limited lifetime warranty.
| Switchcraft home |
About Us | Products | What's
New | Search | Contact Us