BANTAM (TT) PLUGS
1. TT251 and TT252
2. TT253 and TT254
FEATURES
2- and 3-conductor bantam plugs designed for use with
bantam jacks with a .176 inch inside diameter bushing. Approximately 1/2 the size of standard
longframe plugs, yet retains the uniformity, dependability and quality of MIL-type phone plugs.
Series TT250
bantam plug is available with red or black handles. Also available with nickel-plated plug fingers. (Add "N" to part number:
TT253N,TT254N)
Plugs feature a one-piece tip rod, ring and a one-piece sleeve with integral plug body, assembled together into a mold as inserts. Providing complete continuity of thermoplastic insulation between tip rod, ring and sleeve. Internal interlock of all parts prevents shifting and shorting under extreme rugged usage.
Internal 12-24 threads in end of plug body are intended for threading over outer jacket of a patch cord to provide a superior cable anchor.
SPECIFICATIONS
Tip Rod, Ring, Sleeve and Body: Copper alloy,
natural finish.
Terminals and Terminal Screws: Copper alloy, natural finish.
Insulation: Thermoplastic.
Handle: Molded plastic.
Removing handle from plug body can be easily
accomplished by lightly squeezing the knurled areaof the handle and twisting 30° counter-clockwise.
| Part Number |
Conductors |
Terminals |
Typical Mating Jack1 |
Handle |
Handle Part Number |
MIL-Type Number |
| TT251 |
2 |
Screw2 |
TT31 |
Black |
T2302 |
-- |
| TT252 |
2 |
TT31 |
Red |
T2315 |
-- |
| TT253 |
3 |
TT32B |
Black |
T2307 |
M642/13-1 |
| TT253N |
3 |
TT32B |
Black |
T2324 |
-- |
| TT254 |
3 |
TT32B |
Red |
T2301 |
M642/13-2 |
| TT254N |
3 |
TT32B |
Red |
T2325 |
-- |
| 2P2003 |
3 |
TT32B |
Less Handle |
-- |
-- |
1 Switchcraft Part Numbers. Additional mating jacks are listed in this section.
2 Switchcraft Replacement screw P2440; terminal P2642. One of each required with 3-conductor plug. |
click here to download
dimensional drawings
(you will need to have Adobe Acrobat installed on your system to do this)
