1/4" COMMERCIAL PHONE PLUGS

1. 2-CONDUCTOR/PLASTIC OR SHIELDED HANDLES Numbers 70, 184
2. 2-CONDUCTOR/PLASTIC OR SHIELDED HANDLES Number 170, 181
3. 2-CONDUCTOR/PLASTIC OR SHIELDED HANDLES Number 40
4. 2-CONDUCTOR/PLASTIC OR SHIELDED HANDLES Number 160

click here to download a schematic drawing
(you will need to have Adobe Acrobat installed on your system to do this)

Popular general purpose plug fits all standard jacks. Available in both 2- and 3-conductor types. Two-conductor plugs available with black or red molded plastic, or 3 different lengths of brass nickel-plated (shielded) handles. 3-conductor plugs on next page.

2-Conductor Special Military Plugs are also available.

FEATURES

* 1-piece tip rod staked into tip terminal insures tightness

of plug.

* All essential conducting members are brass with external

parts nickel-plated.

* Terminal screws: broad-headed. In production quantities,

screws may be eliminated and terminals hot-tinned for

easier soldering of wire leads to terminals (special order).

* Screw terminals have grooves which accommodate 1 or

2 cord tips.

* Thermoplastic handle insert for greater insulation.

* Plugs accept up to .25 inch maximum diameter cable

(parallel or shielded cable).

SPECIFICATIONS

Sleeve, Tip and Body: Nickel-plated copper alloy.
Terminals: Solder lug: copper alloy, electro-tinned.

Screw: steel, tin-plated.

Handles: Shielded: Nickel-plated copper alloy.

Molded: black or red plastic.

Part Number	Terminals	Typical Mating Jack2	Handle	Handle Part Number
40	Screw (Replacement Screw Part No. P10013) 2 required	11 or Z15J	Black	M1001
703			Shielded	Handle: T10141 Insulator:
160			Shielded	Handle: T10451 Insulator: A10061 _ Handle: T112311 Insulator: A10064 Handle:
2P1251			Without Handle	--
1701 182QB 182QBD			Shielded	Handle: T112311 Insulator: A10064
1843	Solder Lug & Cable Clamp		Shielded	Handle: T10141 Insulator: A11372
184L4			Shielded	T2322
1 2-piece shielded handle with built-in cable clamp for .25 inch diameter cable. Handles: Number T11231, handle; Number T11241, cap; see above for insulating tube; Number T1125, rubber washer. 2 Other mating plugs are available. 3 Handle has .380 inch (9.65mm) diameter hole to accommodate .375" diameter cable. 4 Handle has .451 inch (11.51mm) diameter hole to accommodate larger diameter cables.

Previous Page | Return to Index | Next Page

To search a category please click on the corresponding icon:



| Connectors | Jacks and Plugs |
| Patch Panels, Patch Kits & Jackfields | Cable Assemblies and Patch Cords | Switches |

All products shown are covered by Switchcraft's limited lifetime warranty.

| Switchcraft home |
About Us | Products | What's New | Search | Contact Us