LONG FRAME (1/4") TWIN ROW JACK PANELS

1. Series 2400 (shown with optional jacks)
2. Series 2600 (shown with optional jacks)
3. 2600301 (shown with optional jacks)

click here to download a schematic drawing
(you will need to have Adobe Acrobat installed on your system to do this)

STANDARD TWIN ROW JACK PANELS

SERIES 2400, 2600, 2600300, 2700300 -- PHENOLIC

Twin row jack panels offer greater jack density - up to 52 jacks per panel. All panels fit standard 19 inch wide racks. Blank panels or standard assemblies can be ordered from Switchcraft. Series 2600 panels are direct equivalent to WEco #230A.

SERIES 2400

Twin row panel accommodates 48 T-Jax®. Openings are on alternate .625 inch and .75 inch centers. Panel is 2.125 inches high and fits standard 19-inch racks. Twin plug cannot be cross-connected between jacks in adjacent quads, but may be connected either horizontally or vertically in the same quad. Single designation strip.

SERIES 2500

Same as Series 2400 except MT-Jax^® are used.

SERIES 2600

Twin row panel accommodates 52 T-Jax^® in standard 1.75- inch x 19-inch racks. Jack openings are on continuous centers. Twin plug can be connected to any two adjacent jacks, either horizontally or vertically. Two designation strips. WEco equivalent is #230A.

SERIES 2600300

Same as Series 2600, except designation strips are Kwik-Change^® type, providing larger vertical marking area. Top strip holder is recessed into top of panel to provide additional strength. 2600301 has single height designation strips (one above and below each row of jacks).

2600310

Has a double height strip above top row and a steel reinforcing strip below bottom row. Top strip has .188 inch overhang above 1.75 inch panel height, helping seal the small opening between adjacent panels. Note: overhang prevents mounting panel one above another in a rack.

SERIES 2700

Same as Series 2600 except MT-Jax^® are used in panel assemblies. The series is available with cable tie bar.

ORDERING

1. Order basic panels and popular assemblies by part

number from table.

2. For special panels provide complete details with your

inquiry or order.

3. Series 2600 is available with hole pre-drilled for vertical

designation strips, Series DS320. Add prefix "D" to part

number (D2600301, etc.).

4. Jack Mounting Screws: #6-32, P10725, can be ordered

separately. Contact Switchcraft.

Part Numbers			Part Numbers	Description
	Assembly with Jacks Having Solder Lugs		Assembly with Jacks With Wire-Wrapping Terminals	Number of Jacks	Type of Jacks Installed
Panel Only	Straight	Offset
1200	-	-	-	None
-	¤2432	¤2432A	-	48	T332A
-	¤2432B	¤X2432B	-	48	T332B
-	¤2434B	¤X2434B	-	48	T334B,or XMT334B MT-Jax®
-	2532A	¤X2532A	¤W2532A	48	MT332A, XMT332A or WMT332A MT-Jax®
-	¤2532B	¤X2532B	-	48	MT332B or XMT332B MT-Jax®
-	¤2533	-	-	48	MT333 MT-Jax®
-	¤2533B	-	¤W2533B	48	MT333B or WMT333B MT-Jax®
-	¤2534B	X2534B	-	48	MT334B or XMT334B MT-Jax¨
-	¤2542B	-	-	48	MT342B MT-Jax®
-	¤2544B	-	-	48	MT344B, MT-Jax®
-	¤2588B	-	-	24	MT388, Twin MT-Jax®
-	¤2589B	-	-	24	MT389 Twin MT-Jax®
2600	-	-	-	None	-
2600301	-	-	-	None	(WEco equivalent #230A)
2600310	-	-	-	None	-
-	¤2732A	¤X2732A	-	52	MT332A or XMT332A MT-Jax®
-	¤2732A301	¤X2732A301	¤W2732A301	52	MT332A, XMT332A or WMT332A MT-Jax®
-	¤2732B	¤X2732B	-	52	MT332B, XMT332B or WMT332B MT-Jax®
-	¤2732B301	¤X2732B301	¤X2732B301	52	MT332B, XMT332B or WMT332B MT-Jax®
-	¤2733	-	-	52	MT333B, MT-Jax®
-	¤2734B	¤X2734B	-	52	MT334B or XMT334B MT-Jax®
-	¤2734B301	¤X2734B301	¤W2734B301	52	MT334B, XMT334B or WMT334B MT-Jax®
-	¤2789	-	¤W2789	26	MT389 or WMT389 Twin MT-Jax®
-	-	¤X2832	-	48	XT332A
-	-	¤X2932	-	48	XMT332A

Prefix "X" denotes offset lugs for buss wiring.
¤ Special order only; contact factory for price and delivery.

To search a category please click on the corresponding icon:



| Connectors | Jacks and Plugs |
| Patch Panels, Patch Kits & Jackfields | Cable Assemblies and Patch Cords | Switches |

All products shown are covered by Switchcraft's limited lifetime warranty.

| Switchcraft home |
About Us | Products | What's New | Search | Contact Us