SC800 Instrument Direct Box
 
The SC800 Instrument Direct Box from Switchcraft® converts the outputs of high impedance line level audio devices and musical instruments to low impedance, balanced and isolated mic level signals that can be connected to audio console's, mic pre's, effects processors, and other equipment with 3-Pin XLR
inputs.
The SC800 was developed with one goal in mind... to provide audio engineers and musicians with the highest quality passive direct box available
today.
Built by hand in Chicago, USA.
SC800 Technical Specifications:
All measurements were taken with a 25Ω source into a 1kΩ load measured on XLR output.
Common Mode Rejection
Greater than 100dB at 60Hz
Input Impedance
Greater than 150kΩ at 1kHz
Output Impedance
Less than 170Ω at 1kHz
Phase Response
Less than 3° at 20Hz
Less than 1° at 1kHz
Less than 16° at 20kHz
Total Harmonic Distortion + Noise
Less than .05% (At 20Hz, +4dBu)
Less than .006% (At 1kHz, +4dBu)
Maximum Input Level
+21dBu (At 20Hz with 1% THD)
+41dBu (With 20dB Pad Engaged)
Frequency Response
10Hz to 40kHz (+/-0.3dB, ref 1kHz)
Voltage Gain
-23dB
-43dB (With 20dB Pad Engaged)
View the new product bulletin for the SC800 Instrument Direct Box
(you will need to have Adobe Acrobat installed on your system to do this)
To search a category please click on the corresponding button:
| Connectors | Jacks and Plugs |
| Patch Panels, Patch Kits & Jackfields | Cable Assemblies and Patch Cords | Switches |
All products shown are covered by Switchcraft's limited lifetime warranty.
Switchcraft Inc., 5555 N. Elston Ave., Chicago, IL 60630
Phone: 773-792-2700 Fax: 773-792-2129
|
